A product is subject to different climatic conditions during its life (transport and/or in use).
– Dust tightness
– Water tightness
The BGEMC lab has the necessary infrastructure and expertise to execute these climate tests.
– Information Technology Equipment (ITE)
– Medical devices and appliances
– Laboratory and measuring equipment
– Agricultural vehicles
– Wireless applications
The table gives an overview of the standards according to which the BGEMC lab can test.
However, this is only a limited list. Do not hesitate to contact us for any specific question.
Internal volume: 600 L
Temperature range: -70°C … + 180°C, 10% … 98 % RH
Internal dimensions: H: 95 cm x W: 77 cm x D: 80 cm
Temperature chamber 1 and 2
Internal volume: 112 L
Temperature range: -40°C … + 180°C
Internal dimensions: H: 50 cm x W: 50 cm x D: 45 cm
Protection of Equipment
Protection of Persons
Dust Chamber: W: 1 m, L: 1 m, H: 1 m
Including Under-pressure and Temperature control
1. Full compliant testing
In case a product fails during the full compliant test an acceptable solution will be looked for, possibly we can switch free of charge to pre-compliant testing.
2. Advice: In case more in-depth research is required advice of an independent expert can be appealed to.
3. Pre-compliant testing
Appropriate for testing a prototype.
Tests are executed using the same calibrated equipment and by the same skilled test engineers.
|Temperature||EN 60068-2-1||Test A: Cold|
|EN 60068-2-2||Test B: Dry Heat|
|EN 60068-2-14||Test N: Change of Temperature|
|Climate||EN 60068-2-30||Test Db: Damp Heat, cyclic|
|EN 60068-2-61||Test Z/ABDM: Climatic sequence|
|EN 60068-2-67||Test Cy: Damp heat, steady state, accelerated test intended for components|
|EN 60068-2-78||Test Cab: Damp Heat, steady state|
|Dust/Water||EN 60529||Degrees of Protection (IP Code)|
|Temperature||IEC 60068-2-1||Test A: Cold|
|IEC 60068-2-2||Test B: Dry Heat|
|IEC 60068-2-14||Test N: Change of Temperature|
|Climate||IEC 60068-2-30||Test Db: Damp Heat, cyclic|
|IEC 60068-2-61||Test Z/ABDM: Climatic sequence|
|IEC 60068-2-67||Test Cy: Damp heat, steady state, accelerated test intended for components|
|IEC 60068-2-78||Test Cab: Damp Heat, steady state|
|Dust/Water||IEC 60529||Degrees of Protection (IP Code)|